Saturday, November 17, 2012

Project P - Update 4, Bailless Kit Installed - New Motivation in 2012

I've been on this Project P for the "Penn Staal" for a while now and frankly been unable to complete it...

The first documented effort I have for this reel came way back in 2010 (I know it's not so long ago for some of yall), and throughout the years I've been working on it here and there.  I recently remembered my dear old friend and decided to re-new my commitment to the project and this dear gem of American surf fishing history.

(plus, how do you forget an old friend from the 1960's...)


So far...
- As you can see I have done the sanding (keep our precious "made in USA" on the seat)
- Purchased the carbontex drag set and replacement washer to replace the Teflon from Alantani.
- Purchased and installed the Bailless kit (however my roller ring is not rolling!)
- Bought the pancake handle

Now,
- I need to decide whether or not to drill first before annodizing or be content on baking.
- Also where can I buy a replacement pendant for the metal side plate?
- Decide on a drilling pattern
- Re-build the anti-reverse switch. I will not be using it.
- Find replacement Pendant

Here are the links to my previous post for my "Project P" Penn 704 Custom Edition:

The Inspiration - Penn 706z - Classic "bailless" Montauk Special
Project P - Update 1, Paint Stripping Materials
Project P - Update 2, Body, Spool, Plate Started
Project P - Update 3, Fully Sanded

********************************************************

Here she is after hiding away in my tackle storage cabin, waiting for my attention all these years:






Until, the next step, Ciao !!

Friday, November 16, 2012

Love for Vintage Grizzly Fenwick Topwater SC622 - Fall Gear, 2012

It's getting harder to find these beauties...

 
This is my second Grizzly Fenwick SC622 but first modeled in the 1980's.  The distinguished brown blank that became the norm for fiberglas rods in the 80's came after the traditional yellow/honey blank.
The dark contrast made it possible to have brighter contrast thread-work and a different SC622.
5 guides + tip and traditional ferrule built for pistol grip handles such as Featherweight Champion out of Glendale, California this setup is reminiscent of ones that have been forgotten stateside.

A banner rod not-for-collection rather to be put to work.

Enjoy!




















Ciao!

Thursday, September 6, 2012

Custom Build - "Mita" - Blackhole 250g Jigging Rod

Specifications:
Blank:  Blackhole 250g Nano
Guides:  Fuji T-HVSG, T-SVSG, T-LNSG
Tip:  Fuji T-MNST
Seat:  Custom Painted Matagi DPS-LD (E) Real Marble 20
Grip:   Matagi Super Support Eva
Thread:  Gudebrod Nylon, Prowrap Colorfast
Butt:  Fuji GC-22 Graphite + Matagi FBC-VR
Bling: Matagi seat grommet, Fuji ring


加油日本!  Featured on Matagi Homesite (thank you Mamoru): Matagi English Blog Site (custom rod by friends)






























Wednesday, July 4, 2012

Jigstar Custom Foam Handles - Kojak's Original EVA Masterpieces

Love from New Zealand - Jigstar foam handles

Happy July 4th, 2012 fellow anglers !!

Just had the fortunate luck to add some nice tuned EVA pieces to my custom rod building arsenal.  The first time I felt this design was in North Carolina.  Simple & lightweight foam.

215workshop after the drop. . .


Tuesday, June 26, 2012

Summer Flounder in June - Aboard the Lady Frances, June 23, 2012

I took a quick trip to Rhode Island as I knew that the fishing was hot and it was a matter of time until the huge schools of fluke migrate out of the waters in and around Point Judith & Narraganset.

While in port I decided that whether the outcome was good or bad, that it would be a success.  Today it was one of the days where you are glad you were fishing with a good bud and could laugh at the failures and struggles of righting the ship when your stern isn't producing the normal and much expected bounty.

Different drift and wind causes a challenge to recognize which type of bait rig you need to use.  A faster drift means a longer trailing rig.  Our morning drift gave us a quick moving pass over the fish.  I used up to 10 ounces to really keep touch with the bottom.  I've learned that this fishery needs anywhere from 6-12 ounces to be effective when using bait.  The late morning and afternoon was a pure bucktail and inchiku jig catch.  Both Jie & I caught some nice fluke over 20 inches on the inchiku jigs I prepared.  Along with fluke, Jie took a 11 inch porgy while I was pulling up countless beautiful skate (see photo below). 

Being a quickstrike trip I had limited gear so when arriving to the dock, I picked up some more terminal gear:
  • Rods:  Lamiglas 7040CT, Daiwa Saltiga SA66MF, St. Croix Premier PM76MHF, St. Croix Tidemaster TC76MHF
  • Reels:  Shimano Ocea Jigger 1500PG, Shimano Stradic FJ5000, Abu Ambassadeur 7000 (Vintage), Abu Garcia 6500C Catfish Special
  • Rigs:  Doormat Fluke Rig By Little Rhody Tackle, Homemade bait rigs, Homemade Porgy Rigs, Homemade Yozuri Inchiku jigs.
  • Leader:  Seaguar Premium #40lb Fluorocarbon, Ande Monofiliment #60lb
  • Swivel:  Spro #150lb Ball Bearing
  • Squid Teaser:  Yamashita, Shimano Engetsu

Technique:  I best found that when dragging bait rigs to keep them still.  There really wasn't a need to bounce bottom unless you felt it getting caught up.  Most the bottom of the area we fished didn't have snags or wreck debris.  Perhaps one of the drops had some wreckage but it was minimal.
Whilst bucktailing, the short pump of the jig found most fish tugging instead of really attacking the hooks.  I did feel some quick lateral movement worked in random interval would help attract fluke as their peripheral view of my jig increase as I was higher off the bottom.  Inchiku jigging seemed to work both with the drag/bait and bounce/raise technique.
Another note, the less movement the more skate fish.  So I kept the rig moving.  :) 

Anglers: Jie & I
City of Port: Point Judith, Rhode Island
Fishing Location: Block Island (Southwest corner)
Departure Time: 7AM-4PM
Captain Name: Rich
Vessel:  Lady Frances - Frances Fleet
Species Caught: Summer flounder, Skate, Black Seabass, Porgy



Monday, June 25, 2012

White Shimano Stradic FJ 5000 - Very Improved Classic, Summer Gear 2012

When I first heard from the 2010 iCAST show that the 2011 Stradic was going to be changed back to its former white color scheme I was delighted.  Although I feel my tackle game had moved on beyond the Stradic level it drew me in to see what other improvements it has been made along with just the color.

At 10.3 ounces, the new white Shimano Stradic Spinning Reel is a reel that lives up to its lineage of great but not out-of-this-world performance.  I felt comfortable to know that Shimano had heard the cry of saltwater users regarding the line roller bearing seizing up after continuous use in wet conditions.  There is now a hole
aligned behind the roller arm that allows us to drip bearing lube or solvent (Reel Magic) when the service is needed.

I know that there is a some talk about the reel being upgraded with aftermarket ceramic bearings to bring the total number of bearings to 10+1.  Although I did not decided to upgrade yet I will after some good usage. 

Here are some photos, enjoy!